{"id":8002,"date":"2026-10-27T14:08:21","date_gmt":"2026-10-27T06:08:21","guid":{"rendered":"http:\/\/192.168.3.16\/?post_type=product&p=8002"},"modified":"2026-10-27T14:08:21","modified_gmt":"2026-10-27T06:08:21","slug":"sc3011","status":"publish","type":"product","link":"https:\/\/www.qishan-sh.com\/en\/product\/sc3011\/","title":{"rendered":"SC3011 switch input isolator (one in, one out, relay output)"},"content":{"rendered":"

Switch input isolator, input dry contact or NAMUR proximity switch signal, isolated and converted to relay\/transistor output. DIP switches can be used to set output and input same-phase or inverted logic control (default same-phase), set line fault monitoring on or off (default on, LED flashes on line fault), and set the second output function (as relay\/transistor output or as fault alarm output). This product requires independent power supply, with three-port isolation of input, output and power.<\/p>\n

Note:<\/strong>Three-port isolation of input, output and power. 24V DC independent power supply (note polarity of power terminals, module has power reverse protection); input side connects to dry contact switch or NAMUR proximity switch; output side is relay contact, can drive \u226440mA load, allowable load 250VAC\/2A or 30VDC\/2A. Module indicators: green power indicator, red fault signal, yellow channel status. When line fault monitoring is on, input disconnection (\u226450\u03bcA) or short circuit (\u22656.5mA) will cause the output relay to open and the red indicator to flash. All terminals are hot-swappable. Specific terminal numbers are subject to the silkscreen on the module side.<\/p>\n

Ordering information:<\/strong><\/p>\n