IPAQ R530 HART Rail Temperature Transmitter (Wireless Type)
HART® 7-compatible universal DIN rail-mounted two-wire temperature transmitter with NFC® and Bluetooth® wireless configuration and extended diagnostics.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
The IPAQ R530 is a modern HART® temperature transmitter that meets the highest standards of accuracy and reliability. As a universal transmitter, it is compatible with RTD, thermocouple, voltage and potentiometer sensors, offering high flexibility and reducing the number of product variants installed on site.
The IPAQ R530 is fully compatible with the HART® 7 protocol and provides extended diagnostic information (such as device faults, sensor and wiring status) for reliable measurement and outstanding accuracy.
The IPAQ R530 supports NFC® (near-field communication) and Bluetooth® communication, enabling remote transmitter configuration and monitoring. The transmitter is mounted on a DIN rail inside the control cabinet for convenient centralised installation.
| Parameter Name | Technical Specifications |
|---|---|
| Basic Parameters | |
| Product Type | Rack-mounting Type |
| Transmitter Type | Digital |
| Measurement Channels | Single Channel |
| Input | |
| Input Signal | Resistance thermometer (RTD), thermocouple (TC), mV, resistance |
| RTD Input | Pt100, Pt1000, Ni100, Ni120, Ni1000, Cu10 |
| Thermocouple Input | Types B, C, D, E, J, K, N, R, S, T |
| Sensor Wiring | 2-Wire, 3-Wire, 4-Wire Wiring |
| Minimum span adjustment | 10 °C (18 °F), or sensor-dependent |
| Zero adjustment | Any value within the range |
| Output and Communication | |
| Output Signal | 4-20 mA, HART protocol |
| HART® compatibility | Fully compatible with HART® 7 protocol and backward compatible with HART® 6 and HART® 5 |
| Configuration Mode | ConSoft, INOR Connect, or EDD, DTM / FDT systems |
| Wireless connection | NFC® and Bluetooth® |
| Analogue output | Fixed current output for up to 15 minutes |
| Sensor fault response | NAMUR NE43 standard |
| Error compensation | Sensor error and system error correction |
| Power Supply and Isolation | |
| Electrical Isolation | 1500 VAC |
| Power Supply | IPAQ-R530: 8.5…36 VDC IPAQ-R530X: 8.5…30 VDC |
| Accuracy and Environment | |
| Typical Accuracy | Max. ±0.08 K or ±0.08% of span |
| Long-term accuracy | Maximum drift ±0.02% of span/year |
| Vibration Resistance | IEC 60068-2-6, 8 g |
| Relative Humidity | 0...98% RH (No Condensation) |
| Ambient Temperature | -40…+85 °C (-40…+185 °F) |
| Operating hour counter | Cumulative operating hours counter |
| Adjustable filter level | 0.17…90 s (default 0.9 s) (3-wire RTD) |
| Certification and Compliance | |
| Certification | ATEX, IECEx, cFMus |
| Electromagnetic Compatibility (EMC) | EN 61326-1 and EN 61326-2-3 |
- Universal input: compatible with RTD, thermocouple, voltage (mV) and potentiometer sensors
- Fully compatible with HART® 7 protocol and backward compatible with HART® 6 and HART® 5
- Provides extended diagnostic information (device faults, sensor and wiring status)
- Supports NFC® and Bluetooth® wireless configuration and monitoring
- DIN rail mounting for centralised arrangement and maintenance in control cabinets
- Isolated input/output design
- ATEX, IECEx, FM certified versions available
Smart factory HART networking
Connect to the asset management system to read diagnostic information, and enable rapid commissioning and maintenance of cabinet instruments via wireless configuration.
In-cabinet temperature measurement in hazardous areas
Select the intrinsically safe certified version for in-cabinet temperature signal acquisition and remote monitoring in hazardous areas.
Universal acquisition for multiple measuring points
A single model covers multiple sensor types, suitable for plants with diverse measuring point types and a need to streamline spare part varieties.
Documents not uploaded. Please fill in the information row by row in the 'Product Details Field' panel under 'File Name | Download Address | File Size'.
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
