FI-PFH-NS0137-R Type 16-channel communication board
K-System HART multiplexer connection board, 16-channel, supports series or parallel wiring, integrated switchable 220 Ω resistor.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
Pepperl+Fuchs FI-PFH-NS0137-R communication board, K-System HART multiplexer connection board, 16-channel, supports series or parallel wiring, integrated switchable 220 Ω resistor, screw terminal wiring.
Part of the HART Interface Devices series, used for communication access, signal tapping and commissioning configuration between DCS/PLC control systems and HART field instruments, supporting HART protocol (including WirelessHART) multiplexing, loop conversion and filtering, and compatible with mainstream barriers and termination boards.
| Parameter Name | Technical Specifications |
|---|---|
| HART signal channel (non-intrinsically safe) | |
| load resistor | 220 Ω, switchable on |
| Interface | |
| Type | Multiplexer connection: IDC plug, 26-pin |
| Signal lines | |
| Rated current | Max. 30 mA per channel |
| Indication/setting | |
| Operating elements | DIP switch |
| DIP switch | Operating mode selection: ON: without load resistor, OFF: with load resistor |
| Factory setting | DIP switch S1 and S2: ON |
| Directive conformity | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity | |
| Electromagnetic compatibility | NE 21:2017, see system description |
| Degree of protection | IEC 60529:2001 |
| Shock resistance | EN 60068-2-27 |
| Vibration Resistance | EN 60068-2-6 |
| Ambient Conditions | |
| Ambient Temperature | 0 … 50 °C (32 … 122 °F) |
| Storage Temperature | −15 … 50 °C (5 … 122 °F) |
| Relative Humidity | ≤93%, non-condensing |
| Shock resistance | 15 g, 11 ms |
| Vibration Resistance | 1 g, 10 … 150 Hz |
| Mechanical parameters | |
| Degree of protection | IP20 |
| Field side | Screw terminal, green |
| Control side | Screw terminals, green, HART: 1 x IDC plug, 26-pin |
| Core cross-section | 0.25 … 1.5 mm2 (24 … 16 AWG) |
| Housing | PVC |
| Weight | Approx. 210 g |
| Dimensions | 110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W × H × D) |
| Installation Method | Mounts on 35 mm DIN mounting rail in accordance with EN 60715:2001 |
| Hazardous area application data | |
| Certificate | PF 11 CERT 1930 X |
| Marking | II 3G Ex nA IIC T4 Gc |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020, EN 60079-15:2010 |
| General information | |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals and manuals within the applicable scope. For related information, see www.pepperl-fuchs.com. |
- K-System HART multiplexer connection board
- 16-channel
- Supports series or parallel wiring
- Integrated switchable 220 Ω resistor
- Screw terminal wiring
Petrochemical Plant
HART field instrument commissioning and configuration communication
Power Energy System
DCS system HART multiplexer access
Process Automation
HART signal filtering and tapping between control room and field instruments
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
