HM-PF-USB-010031 Viator USB HART Interface
Compatible with Windows® 7, 10 and 11, HART-compliant, communicates with any HART field device and performs error-free slave testing, powered by the USB port, no external power supply required for the modem, compact and robust polycarbonate housing, industrial-grade reliability.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
Pepperl+Fuchs HM-PF-USB-010031 Viator USB HART Interface, compatible with Windows® 7, 10 and 11, HART-compliant, communicates with any HART field device and performs error-free slave testing, powered by the USB port, no external power supply required for the modem, compact and robust polycarbonate housing, industrial-grade reliability, integrated connection cable, terminated with 2 test clips and 1 USB connection cable.
Part of the HART Interface Devices series, used for communication access, signal tapping and commissioning configuration between DCS/PLC control systems and HART field instruments, supporting HART protocol (including WirelessHART) multiplexing, loop conversion and filtering, and compatible with mainstream barriers and termination boards.
| Parameter Name | Technical Specifications |
|---|---|
| Power Supply | |
| Input current | 11 mA at 5 V |
| Power Supply | Powered by USB port, No external power required |
| Interface | |
| Interface type | USB port |
| Output | |
| Signal | 0.5 ± 0.1 Vpp trapezoidal wave at 1200/2200 Hz, 24 VDC at 40 mA to device |
| Electrical Isolation | |
| Output/Interface | 1500 V DC |
| System requirements | |
| Operating system | Windows® 7, 10 and 11 |
| Ambient Conditions | |
| Operating Temperature | −20 … 50 °C (−4 … 122 °F) |
| Storage Temperature | −20 … 60 °C (−4 … 140 °F) |
| Relative Humidity | 0 … 95 % non-condensing |
| Mechanical parameters | |
| Degree of protection | IP20 |
| Connection | USB (type A) Connector, test clips |
| Material | Polycarbonate |
| Dimensions | 75 mm x 33 mm x 15 mm |
| Height | 15 mm |
| Width | 33 mm |
| Length | 75 mm |
| Cable length | 1.8 m 2-strand wire terminating in 2 test clips, 15.2 cm cable terminating in 1 USB type A connector |
| General information | |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals and manuals within the applicable scope. For related information, see www.pepperl-fuchs.com. |
- Compatible with Windows® 7, 10 and 11
- HART-compliant, communicates with any HART field device and performs error-free slave testing
- Powered via USB port, no external power supply required for the modem
- Compact, rugged polycarbonate housing for industrial-grade reliability
- Integrated connection cable terminating in 2 test clips and 1 USB connection cable
- Compliant with USB 1.1
- No polarity requirement for test clips
Petrochemical Plant
HART field instrument commissioning and configuration communication
Power Energy System
DCS system HART multiplexer access
Process Automation
HART signal filtering and tapping between control room and field instruments
Documents not uploaded. Please fill in the information row by row in the 'Product Details Field' panel under 'File Name | Download Address | File Size'.
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
