TW500 loop-powered signal isolator
For 0(4)~20 mA DC signals, isolates current loops without a separate power supply, single-channel/dual-channel/triple-channel, 22.5 mm DIN rail housing.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
For 0(4)~20 mA DC signals, isolates current loops without a separate power supply, single-channel/dual-channel/triple-channel, 22.5 mm DIN rail housing.
Main specifications: accuracy < 0.1 %.
| Parameter Name | Technical Specifications |
|---|---|
| Main specifications | |
| Current | 0(4)..20 mA DC |
| Voltage | 27 V DC |
| Test voltage | 4 kV DC input / output |
| Rated Voltage | 630 V according to VDE 0110 group 2 |
| Operating Temperature | -20..+60 °C |
| Conformity | EN 61326-1:2013 |
| Load | < 1200 Ω (I ≤ 20 mA) |
| Response time (T90) | < 30 ms Not used outputs must be shorted by a link. |
| Accuracy | < 0.1 % |
| Temperature | < 0.001 %/°C |
- For 0(4)~20 mA DC signals, isolates current loops without a separate power supply, single-channel/dual-channel/triple-channel, 22.5 mm DIN rail housing.
- Accuracy: < 0.1 %
Control cabinet signal isolation
Install an isolator between the PLC and field instruments to break earth loops and suppress common-mode interference.
Hazardous area signal isolation
Intrinsically safe products are used for signal isolation and energy limitation between hazardous and safe areas.
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com



