UT125 universal transmitter
Converts standard signals, Pt100, thermocouples and potentiometers to 4~20 mA, DIP-switch configuration, with Pt100 fault monitoring, 12.5 mm DIN-rail housing.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
Converts standard signals, Pt100, thermocouples and potentiometers to 4~20 mA, DIP-switch configuration, with Pt100 fault monitoring, 12.5 mm DIN-rail housing.
Main specifications: output 4..20 mA, max. burden 400 Ω; supply voltage 20..125 VDC andUT125.
| Parameter Name | Technical Specifications |
|---|---|
| Main specifications | |
| Supply voltage | 20..125 VDC andUT125 |
| Voltage | 253 V AC |
| Test voltage | 3 kV AC between power supply |
| Input = output | |
| Operating Temperature | -10..60 ℃ |
| Storage temperature | -20..80 °C |
| Humidity | 10..90% (no condensation) |
| Current | 0/4..20 mA, Ri approx. 60 kΩ Pt100 linearised, measurement current 1.6 mA |
| Short circuit | Actual value drops to |
| Output | 4..20 mA, max. burden 400 Ω |
| Type | 0..250 ℃ |
- Converts standard signals, Pt100, thermocouples and potentiometers to 4~20 mA, DIP-switch configuration, with Pt100 fault monitoring, 12.5 mm DIN-rail housing.
- Output: 4..20 mA, max. burden 400 Ω
- Supply voltage: 20..125 VDC andUT125
Reactor temperature monitoring
Converts Pt100 or thermocouple signals to 4~20 mA and feeds them into the temperature control system for interlocking.
Over-temperature protection for heating equipment
The safety temperature limiter cuts off the heating circuit on over-temperature to prevent equipment damage.
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com



