Troubleshoot in four steps: first, measure whether the voltage at the power supply terminals is normal and the polarity correct; second, confirm whether the input-side signal source (transmitter/switch) has an output; third, check the fault indicator light status to determine whether a wire break/short circuit is reported; fourth, measure the output voltage and current under load and check whether the load exceeds the limit.
For models that supply power to two-wire transmitters (e.g. SC3042), focus on measuring the supply voltage: if the voltage drops too much under load (should be ≥22 V at 20 mA), the transmitter will be under-voltage and produce no output.


