How should the intrinsic safety grounding of a Zener barrier be connected?

Safety Barriers · 17 November 2026

Intrinsic safety grounding should use adedicated, low-impedance, reliablegrounding path; the Zener barrier grounding terminal is connected to the intrinsic safety grounding busbar and then connected to the grounding grid at a single point. The grounding resistance should meet the requirements of the standards and the product, and arbitrary common bonding with power grounds or lightning protection down conductors should be avoided.

After installation, measure earthing continuity and resistance and keep records; during operation, periodically check terminals for looseness and corrosion. Although isolating barriers do not rely on intrinsically safe earthing, they must still have protective earthing.

← Back to Knowledge Sharing

Online customer service
Online customer service Scan or click to contact directly
Contacts
Miss Chen(Safety barriers, isolators, surge protectors)
Ms Chen Personal WeChat QR Code

Scan WeChat QR code to add personal WeChat

QQ:2501529964

Phone:17717626508

Email:chenjing@qishan-sh.com

Miss Lu(Field Instruments, Valve Accessories, Terminal Blocks)
Ms Lu Personal WeChat QR Code

Scan WeChat QR code to add personal WeChat

QQ:1695457483

Phone:13636420802

Email:lhm@qishan-sh.com

Mr. Ye(Technical Support, After-Sales Service)

QQ:97010638

Phone:15800474322

Email:web@qishan-sh.com

Online Message

Please fill in the name

Please fill in a valid contact phone number (7-20 digits)

Please enter a valid email address

Please enter the requirement description (at least 10 characters)