How to determine whether a safety relay is operating normally after power-on?

Safety relay · 17 November 2026

Observe the LED status: the power LED should be permanently on, the input channel LEDs change with the state of the safety device, the output LED indicates the contact status, and the fault LED should be off. Trigger the safety device once (e.g. press the emergency stop) and confirm that the output disconnects reliably and the indicator LEDs change correctly.

A functional test should be performed both at initial commissioning and after maintenance to confirm that the safety function is effective.

← Back to Knowledge Sharing

Online customer service
Online customer service Scan or click to contact directly
Contacts
Miss Chen(Safety barriers, isolators, surge protectors)
Ms Chen Personal WeChat QR Code

Scan WeChat QR code to add personal WeChat

QQ:2501529964

Phone:17717626508

Email:chenjing@qishan-sh.com

Miss Lu(Field Instruments, Valve Accessories, Terminal Blocks)
Ms Lu Personal WeChat QR Code

Scan WeChat QR code to add personal WeChat

QQ:1695457483

Phone:13636420802

Email:lhm@qishan-sh.com

Mr. Ye(Technical Support, After-Sales Service)

QQ:97010638

Phone:15800474322

Email:web@qishan-sh.com

Online Message

Please fill in the name

Please fill in a valid contact phone number (7-20 digits)

Please enter a valid email address

Please enter the requirement description (at least 10 characters)