Dwyer RPME Series FlexiSENSE™ Operating Room Pressure Monitor
FlexiSENSE operating room pressure monitor, LED status indication, 2 sets of SPDT + 4-20mA.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
The RPME FlexiSENSE operating room pressure monitor visually indicates whether differential pressure is within specification via a segmented LCD and green/orange status LEDs. It features 2 sets of independent SPDT control relays and a 4-20mA output, and its stainless steel panel suits operating room cleanliness requirements.
| Parameter Name | Technical Specifications |
|---|---|
| Main specifications | |
| Medium | Air and non-combustible compatible gases. |
| Measurement technology | Resistive. |
| Wetted materials | Consult factory. |
| Enclosure material | Die-cast aluminium housing and stainless steel bezel. |
| Accuracy | ±0.5% RSS (including non-linearity: ±0.49%, |
| Hysteresis | ±0.05% and non- |
| Repeatability | ±0.05%), or ±1% RSS (including non-linearity: ±0.99%, |
| Pressure limits | 0.5~1.0 in w.c range: 9 psi; 2.5~5 in w.c. range: 1.5 psi.. |
| Temperature limit | 32~140°F (0~60°C). |
| Temperature compensation limits | 32~140°F (0~60°C). |
| Thermal effect | 0.020%/°F (0.036/°C) at 77°F (25°C). |
| Power Supply | 12-28 VDC, 12-28 VAC 50~400 Hz. |
| Power dissipation | 3 VA max. |
| Output | 4-20 mA DC, loop impedance not exceeding 900 Ω. |
| Zero and span adjustment | Push-buttons and menu. |
| Display | Backlit 4-digit LCD 0.4" high, LED indicators for setpoint and alarm status. |
| Electrical connection | 15-pin male high-density D-sub connector. Includes 18-inch (46 cm) cable with 10 conductors. |
| Process connection | 1/8" NPT female. Side or rear connection. |
| Mounting orientation | Vertical. Surface diameter: 4-3/4" (120.7 mm) OD x 2-21/32 (67.5 mm). |
| Weight | 1.75 lb (794 g). |
| Model selection | |
| Selection table | Published on the official website as a screenshot of the selection table; for complete model numbers and ranges, see the official manual "RPME_i.pdf" in the documentation package. |
- Segmented LCD + green/orange status LEDs, making it clear at a glance whether differential pressure is within specification
- 2 sets of independent SPDT control relays with adjustable deadband
- 4-20mA process output, 12-28 VDC/VAC power supply
- Stainless steel panel, suitable for operating room cleanliness requirements
Operating room positive pressure monitoring
Monitors the positive pressure of the operating room relative to the corridor to ensure clean airflow direction.
Negative pressure isolation ward monitoring
Monitors ward negative pressure and triggers an alarm when limits are exceeded.
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
