M-LBAS-IA1.IE Surge Protector
For Ethernet-APL spur ports, intrinsically safe in accordance with 2-WISE and FISCO, DIN mounting rail for installation in cabinets or field junction boxes, cable shield grounded via gas discharge tube.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
Pepperl+Fuchs M-LBAS-IA1.IE surge protector, for Ethernet-APL spur ports, intrinsically safe in accordance with 2-WISE and FISCO, DIN mounting rail for installation in cabinets or field junction boxes, cable shield grounded via gas discharge tube.
For lightning and switching overvoltage protection of signal lines, power lines and fieldbus lines between hazardous areas and safe areas, DIN rail or field enclosure mounting, directly connected in series in instrument loops, DCS/PLC I/O and bus trunk/spur lines.
| Parameter Name | Technical Specifications |
|---|---|
| General specifications | |
| Design/Installation | Cabinet mounting |
| Hazardous area installation | Zone 1 |
| Ethernet interface | |
| Interface type | Ethernet-APL auxiliary device |
| Electrical Data | |
| Rated Voltage | 30 V |
| Rated current | 500 mA |
| Impulse withstand rating | 2 kV/1 kA (category C1) per line, 10 kV/5 kA (category C2) per line, 1 kA (category D1) per line |
| Impulse discharge current (10/350 µs) | 0.5 kA per line |
| Per line | 5 kA |
| Total | 10 kA |
| Shield | 10 kA |
| Maximum surge current (8/20 µs) | 10 kA overstress failure mode 3 according to IEC 61643-21 |
| Line/earth | max. 1500 V C1, 1 kA per line, max. 2100 V C2, 5 kA per line, max. 50 V C3, 50 A per line, max. 1300 V B2, 50 A per line |
| Shield/ground | max. 1500 V C1, max. 1800 V C2, max. 50 V C3, max. 1300 V B2 |
| Standards compliance | |
| Degree of protection | IEC/EN 60529 |
| Climatic conditions | IEC 60721 |
| Shock resistance | EN 60068-2-27 |
| Vibration Resistance | EN 60068-2-6 |
| Surge protection | IEC 61643-21 |
| Ethernet | Ethernet-APL, IEEE 802.3 (10BASE-T1L) |
| Ambient Conditions | |
| Ambient Temperature | −40 … 80 °C (−40 … 176 °F) |
| Storage Temperature | −50 … 90 °C (−58 … 194 °F) |
| Relative Humidity | ≤ 95 % non-condensing |
| Shock resistance | 15 g 11 ms |
| Vibration Resistance | 1 g, 10 … 150 Hz |
| Mechanical parameters | |
| Wiring Type | Screw terminals |
| Core cross-section | solid conductor 0.5 … 2.5 mm2, stranded conductor 0.5 … 1.5 mm2 |
| Housing material | Polyamide PA 6.6 |
| Degree of protection | IP20 |
| Weight | 32 g |
| Installation Method | DIN mounting rail |
| Hazardous area application data | |
| EU Type Examination Certificate | TÜV 22 ATEX 8786 X, TÜV 22 ATEX 8816 X |
| Marking | 2-WISE auxiliary device, FISCO |
| Marking | ll 3 G Ex ec llC T6 Gc, [exsign] ll 2 (1) G Ex ia [ia Ga] IIC T6 Gb, [exsign] ll 2 (1) D Ex ia [ia Da] lIIC T80°C Db, [exsign] l M2 (M1) Ex ia [ia Ma] l Mb |
| Voltage | 30 V |
| Current | 500 mA |
| Internal capacitance | Negligible 0 nF |
| Internal inductance | Negligible 0 µH |
| Directive 2014/34/EU | EN 60079-0:2018, EN 60079-11:2012, IEC TS 60079-47:2021 |
| International approvals | |
| IECEx certification | IECEx TUR 22.0017X |
| Certification scope | Ex ec llC T6 Gc, Ex ia [ia Ga] IIC T6 Gb, Ex ia [ia Da] lIIC T80°C Db, Ex ia [ia Ma] l Mb |
| General information | |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals and manuals within the applicable scope. For related information, see www.pepperl-fuchs.com. |
- For Ethernet-APL spur ports
- Intrinsically safe in accordance with 2-WISE and FISCO
- DIN mounting rail installed in cabinet or field junction box
- Cable shield earthed via gas discharge tube
Petrochemical Plant
Lightning and overvoltage protection for instrument signal circuits
Power Energy System
Surge protection for power and signal lines
Process Automation
Surge protection for fieldbus trunk and spur lines
Documents not uploaded. Please fill in the information row by row in the 'Product Details Field' panel under 'File Name | Download Address | File Size'.
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
