SC3013 Switch Input Isolator (one in, one out, transistor output)
Single-channel switch input isolator: dry contact/NAMUR proximity switch input, isolated and converted to transistor collector output, custom logic levels available.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
Same as SC3011, with transistor collector output (custom logic level output accepted). Requires independent power supply, with three-port isolation of input, output and power supply.
Note:Three-port isolation of input, output and power supply. 24V DC independent power supply; input side connects to dry contact switch or NAMUR proximity switch; output side is transistor collector output, custom logic level output accepted; specify required logic level specification when ordering. Module indicators: green power, red fault signal, yellow channel status. Terminals are hot-swappable. Refer to the silkscreen on the module side for specific terminal numbers.
Ordering information:
- Requires independent power supply (18V DC~32V DC).
- Custom logic level output must be specified at the time of ordering.
| Parameter Name | Technical Specifications |
|---|---|
| Power supply and power consumption | |
| Power Supply | 18V DC ~32V DC power reverse protection |
| Power consumption | 1W |
| Input characteristics | |
| Input Signal | Dry contact or NAMUR proximity switch |
| Switching characteristics | Input loop current >2.1mA, output transistor conducts, channel indicator yellow steady on; input loop current <1.2mA, output transistor cut off, channel indicator yellow off |
| Open-circuit voltage | Approx. 8.5V |
| Short-circuit current | Approx. 8.5mA |
| Line fault | Input current ≤50μA, input wire break detected, output transistor cut off; input current ≥6.5mA, input short circuit detected, output transistor cut off; channel indicator red flashing |
| Output and load | |
| Output Signal | Transistor collector output (custom logic level output accepted) |
| Permissible load | 250VAC/2A or 30VDC/2A |
| Drive current | ≤40mA |
| External voltage | <40V DC |
| Switching frequency | <20ms |
| Isolation and electromagnetic compatibility | |
| Electromagnetic compatibility | Transistor: <5kHz |
| Dielectric strength | ≥1500V AC (between input/output/power supply) |
| Insulation resistance | ≥100MΩ (between input/output/power supply) |
| Environmental and Mechanical | |
| IP Protection | IP20 |
| Operating Temperature | -20℃～+60℃ |
| Storage Temperature | -40℃～+80℃ |
| Dimensions | 12.8mm×110mm×117mm (W×H×D) |
| DIP switch settings | |
| DIP switch | S1–S4: non-inverting/inverting logic, line fault monitoring switch, second output function (applicable to SC3014) |
- Transistor collector output (contactless), custom logic level output accepted
- Suitable for PLC high-speed digital input channels
- DIP switch settings for non-inverting/inverting logic and line fault monitoring
- Input open-circuit/short-circuit monitoring, output transistor cut off on fault
- Three-port isolation of input, output and power supply
- DIN rail mounting, hot-swappable terminals
PLC high-speed digital input acquisition
Applications requiring use with PLC high-speed digital input modules, contactless output or specific logic levels
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
