SC3024 Signal Distributor (one input and four outputs, intelligent type)
Intelligent signal distributor: one current/voltage signal is isolated and distributed to four outputs, meeting multi-client data acquisition requirements, configurable via PC programmer.
- Original Factory Genuine, Tenfold Compensation for Counterfeits
- Full Machine Warranty, Lifetime Maintenance
- In Stock, Shipped on the Same Day
Intelligent isolator that isolates and converts an input current or voltage signal into a current or voltage output, enabling simultaneous acquisition by multiple devices. The product requires an independent power supply, with three-port isolation between input, output and power supply, online fault self-diagnostics, and configuration of signal type, signal range, etc. via PC programmer.
Note:Three-port isolation between input, output and power supply. Independent 24 V DC power supply; DC current/voltage signal connected at the input side; multiple signals distributed at the output side in a one-in-four-out configuration, with the signal type and range of each channel configurable via PC programmer. Module indicators: green for power, red for fault signal. All terminals are hot-swappable. Refer to the silkscreen on the module side for specific terminal numbers.
Ordering information:
- When ordering, specify the number of outputs (SC3023 one input, three outputs / SC3024 one input, four outputs) and each model code.
- Factory example: one 0–5 V input, four 4–20 mA outputs, 220 V AC power supply, model SC3023-41111A.
| Parameter Name | Technical Specifications |
|---|---|
| Power supply and power consumption | |
| Power Supply | 18 V DC to 32 V DC |
| Power consumption | ≤2.5W (24V, one input three outputs at full load); ≤3W (24V, one input four outputs at full load) |
| Input characteristics | |
| Input Signal | DC current, DC voltage |
| Input Impedance | DC current: ≤60Ω; DC voltage: ≥1MΩ |
| Distribution voltage | Open-circuit voltage ≤27V, output voltage ≥22V at 20mA |
| Output and load | |
| Output Signal | 0/4～20mA, 0～10mA; 0/1～5V, 0～10V |
| Permissible load | 0/4～20mA: RL≤550Ω, 0～10mA: RL≤1.8kΩ; 0/1～5V: RL≥1MΩ, 0～10V: RL≥2MΩ |
| Accuracy and response | |
| Conversion accuracy | 0.1%F.S. |
| Temperature drift | 30ppm/℃ |
| Response time | ≤500ms |
| Isolation and electromagnetic compatibility | |
| Electromagnetic compatibility | IEC 61326-3-1 |
| Dielectric strength | ≥1500V AC (between input/output/power supply) |
| Insulation resistance | ≥100MΩ (between input/output/power supply) |
| Environmental and Mechanical | |
| IP Protection | IP20 |
| Operating Temperature | -20℃～+60℃ |
| Storage Temperature | -40℃～+80℃ |
| Dimensions | 17.8mm×110mm×117mm (W×H×D) |
| Product Selection Code | |
| Input signal (code 1) | 4-20mA |
| Input signal (code 2) | 1～5V |
| Input signal (code 3) | 0～10mA |
| Input signal (code 4) | 0～5V |
| Input signal (code 5) | 0～10V |
| Input signal (code 6) | 0～20mA |
| Input signal (code 7) | Other customised signals |
| Output signal 1 (code *) | Same as input signal code |
| Output signal 2 (code *) | Same as input signal code |
| Output signal 3 (code *) | Same as input signal code |
| Output signal 4 (code *) | Same as input signal code (default: no output on this channel) |
| Power supply method (code default) | Default 24VDC power supply |
| Power supply (code A) | 220VAC power supply |
- One input, four outputs; four outputs support simultaneous acquisition by multiple clients
- Input/output signal types and ranges configurable via PC programmer
- Three-port isolation of input, output and power supply; online fault self-diagnostics
- Supports multiple signal types: 0/4–20 mA, 0–10 mA, 0/1–5 V, 0–10 V
- Outputs 0 V/mA on input disconnection or short circuit, not exceeding 110% of range upper limit
- 17.8 mm width, DIN rail mounting
One signal shared by four systems
A single process signal is isolated and distributed to four channels, suitable for multi-client data acquisition
Need selection advice or bulk quotation?
Send us the working condition parameters (signal type, medium, range, pressure, temperature, connection method), and our engineers will provide a selection scheme and quotation within 1 working day.
- Phone consultation +86-21-66020232
- Email inquiry web@qishan-sh.com
